SANY:Hydraulic Crawler Crane SCC1800 - Construction Machinery http://www.diging.com/ http://www.diging.com/ http://www.diging.com/ http://www.diging.com/images/img01.jpg Wes, 10 Mar 2010 16:47:56 +0800 http://www.diging.com/aa801.htm Construction Machinery Construction Machinery UTF-8 SANY:Hydraulic Crawler Crane SCC1500C http://www.diging.com/Crane/800-SANY:Hydraulic_Crawler_Crane_SCC1500C.htm Structure:
A.Engine
The imported Cummins Model QSL9 (Tier 3) 4-stroke diesel, inline 6-cylinders, water-cooled, electronic-controlled, rated at 242kW (325hp) /2100rpm.
B.Hydraulic System
The Hydraulic system consists of three parts: main circuit system, servo control system and auxiliary system.
C.Swing Mechanism
Driven by slewing motor and hydraulically buffered, allowing 360o rotation.
D.Luffing Mechanism
Twin-drum luffing winch, equipped with ratchet and pawl at the barrier plate in the middle, ensuring parking safety of the boom system at non-working condition.
E.Cab
Newly-designed full-enclosed cab with Sany characteristics is equipped with adjustable seat, air-conditioner, and four headlights for lower beam and upper beam illumination.
F.Control Operation
Crawler traveling actions are controlled by traveling pedals (control levers).
 
""
Technical Parameters:
H Operating Condition
Max. Rated load(t) 155
Boom Length(m) 18-81
Boom Luffing Angle(o) 30-80
FJ Operating Condition
Full Extensional Boom+Full Extensional Jib(m) (69+31)/(75+13)
Jib Offset Angle(o) 15, 30
Working Speed
Wire Speed of Main and Aux. Winch( Outermost Layer)(m/min) 0~125
Wire Speed of Luffing Winch(Outermost Layer)(m/min) (0~24)x2
Slewing Speed(rpm) 0-2.0
Traveling Speed(km/h) 0~1.2/0~0.6(two speeds)
Gradeability 30%
Engine
Output Power(kW) 242
Rated Rotationgal Speed(rpm) 2100
Transport Data
Max. Transport Weight of Single Part(kg) 50000
Transport Dimensions(lengthxwidthxheight)(mm) 10230x3470x3500
Average Ground Bearing Pressure(MPa) 0.093
]]> Wes, 01 Jul 2009 15:31:06 +0800 http://www.diging.com/Crane/800-SANY:Hydraulic_Crawler_Crane_SCC1500C.htm SANY:Hydraulic Crawler Crane SCC1250 http://www.diging.com/Crane/799-SANY:Hydraulic_Crawler_Crane_SCC1250.htm Structure:
A.Engine
The imported Cummins Model QSC8.3 diesel (Tier 3),inline 6-cylinders,water-cooled,electronic-controlled,turbo-charging,rated at 183kW at 2000rpm.The maximum torque output is 1268Nm,at 1400rpm.
B.Electric Control System
Composed of central controlling unit, man-machine interfaces, sensors, actuators, and connecting wires. Data transmission between the controlling termination is achieved by CAN bus technology, enabling high raliability for the system.
C.Hydraulic System
The Hydraulic system configuration: Rexroth(R), which an achieve inching control.
D.Luffing Mechanism
The luffing winch drum is directly driven by luffing motor through gearbox.
E.Driver's Cab
The sliding door of cab allows easy and safe opening and closing.
F.Counter-weight
The casting coynterweight blocks are installed by piling one by one on counterweight tray, making easy assembly, disassenbly and transportation.
""
Technical Parameters:
Max. Lifting load(mt) 125
Max. Lifting Moment(mtxm) 95.4x7
Boom Length(m) 18-75
Jib Length(m) 13-25
Full Extensional Boom+Full Extensional Luffing Jib(m) 60+25/63+19
Speed of Lufting Wire(m/min) 0-110
Speed of Luffing Wire(m/min) 0-90
Slewing Speed(rpm) 0-2.2
Traveling Speed(km/h) 0.68/1
Rated Output Power/Rated Rotationgal Speed of Engin(kW/rpm) 183/2000
Weight of Overall Crane(kg) 124500
Max. Transport Weight of Single Part(kg) 42000
]]> Wes, 01 Jul 2009 15:24:34 +0800 http://www.diging.com/Crane/799-SANY:Hydraulic_Crawler_Crane_SCC1250.htm SANY:Hydraulic Crawler Crane SCC1000C http://www.diging.com/Crane/798-SANY:Hydraulic_Crawler_Crane_SCC1000C.htm
Structure:
 
A.Engine
The imported Cummins Model QSC8.3 diesel (Tier 3), inline 6-cylinders, water-cooled, electronic-controlled, turbo-charging, rated at 183kW (246hp) at 2000rpm. The maximum torque output is 1268N*m (936 lb*ft), at 1400rpm.
B.Hydraulic System
The Hydraulic system configurations: Rexroth (R) or Kawasaki (K), both can achieve inching control.
C.Swing Mechanism
The luffing winch drum is directly driven by luffing motors through gearbox. Operate the luffing control lever to achieve rolling in two directions, i.e. raising and lowering the boom/jib.
D.Counter-weight
The casting counterweight blocks are installed by piling one by one on counterweight tray, making easy assembly, disassembly and transportation.
E.Luffing Mechanism
The luffing winch drum is directly driven by luffing motors through gearbox. Operate the luffing control lever to achieve rolling in two directions, i.e. raising and lowering the boom/jib.
F.Driver's Cab
The sliding door of cab allows easy and safe opening and closing.
 
""
Technical Parameters:
H Operating Condition
Max. Lifting Load(t) 105
Boom Length(m) 18-72
Boom Luffing Angle(o) 30-80
FJ Operating Condition
Full Extensional Boom + Full Extensional Jib(m) (60+25)/(63+19)
Jib Offset Angle(o) 15, 30
Working Speed
Wire Speed of Main and Aux. Hoisting Winch(m/min) 0-110
Wire Speed of Luffing Winch(m/min) 0-73
Slewing Speed(rpm) 0-1.9(no load)
Traveling Speed(km/h) 0-1.0/0-0.68(two speeds)
Gradeability 30%
Engine
Output Power/ Rated Rotational Speed(kW/rpm) 183(Tier 3)/2000(Tier 3)/186(Tier 2)/2200(Tier 2)
Transport Data
Max. Transport Weight of Single Part(kg) 43500
Transport Dimensions (Length x Width x Height)(mm) 9500x3400x3400
Average Ground Pressure(with Basic Boom)(MPa) 0.085
]]> Mon, 29 Jun 2009 14:09:05 +0800 http://www.diging.com/Crane/798-SANY:Hydraulic_Crawler_Crane_SCC1000C.htm SANY:Truck Crane QY50C http://www.diging.com/Crane/797-SANY:Truck_Crane_QY50C.htm Main Features:
 
1. Novel industrial design:  European apical company designs series products of red star. This products feature novel appearance, hold holistic sense, and show international fashion. Besides advanced punching mould and electrophores is process improve elaborate manufacture.
2. Powerful lifting capacity: Boom embodies overseas or domestic low-alloy high-tensile structural steel and great-circle hexagnoal section, and has good neutral position and strong lifting capacity. Besides big span outrigger has good stabilization.
3. Efficient working performance: Single line pull is large, hoist speed is rapid, and single line speed is 125-135m/min due to double hoist variable motor design. Manipulation is precise, brake is stable, and work stabilization is advanced due to unique rotary cushion design.
4. One-up overlength main boom: Overtake main boom length and lead hoist height. Full extension length of QY50C main boom is 42.5m,and maximum hoist height is 43m.
5. Superexcellent traveling performance:  Powerful engine and reliable chassis systemmake Sany truck crane hold superexcel lenttraveling performance.
6. Precise control system: Limited moment control system is made up of Sany, which merges microelectronic technique intelligent malfunction dagnosis, and dynamical monitor technique. It made the equipment working more safty and efficiency.
7. Excellent ECC system: ECC control and manage system is the original technique of domestic engineering machine, which determines the location with GPS, helps the customer master the vehicle location and  working condition, and realize the vehicle management and malfunction diagnose real time.
8. Strong service: Relay on strong service management of Sany group. extend country-wide 6S service point: take the concept of exceeding industry standard and customer expection, and provide oriental service.
""
Structure:
 
Cab
It is made up of anti-corrosive steel plate, with streamline and full-width type, wide visul field, and elaborate structure. The interlayer safety glass is selected for the front windfield, with the full-sealed intenerated decorative element inside the cab. With heating and defrosting device and air conditioning system, it makes operators confortable, in addition, it has immproved the reliability and security of driving.
Power System
It characterized by oil saving, advanced design, and superior manufacture. It has made oil consumption 20% lower than that of domestic similar products.
Boom System
The main boom is made up by hexagonal section boom sleeve, additionally, as the finite element analysis is adopted, the reasonable design and commpacted structure has been guaranteed. The boom is of rational joint, and it is of the advanced bearing capacity in China.
Hydraulic System
The cartridge inserted valves(USA VICKERS) are selected as electromagnetic valves of the controlling oil circuit, as they are designed in combination of the leading control valve, it is characterized by flexible action as well as stable and reliable performance,and it has also provided protections to numerous combined working conditions.
Slewing&Hoisting System
The planet gear deceleration device and normally closed brake is taken for the slewing mechanism, in addition, the rotary cushion valve for special purpose is equipped to ensure a stable slewing.and, it is of good inching capability. The stepless shifting is achieved in the main and auxiliary hoisting mechanisms,and, it is of high efficiency, large shifting ratio, and reliable working performance.
Technical Parameters
Chasis&Electric System
Optimal chassis design leads to smooth power shifting.
Dimensions
Overall length(mm) 13750
Overall width(mm) 2750
Overall height(mm) 3650
Wheelbase (1st axle - 2nd axle) (mm) 1450
Wheelbase (2nd axle- 3rd axle) (mm) 3850
Wheelbase (3rd axle- 4th axle) (mm) 1350
Weights
Gross weight(kg) 42000
1st and 2nd axle load(kg) 15600
3rd and 4th axle load(kg) 26400
Power
Engine model Shanghai Diesel Engine SC9DK320Q3
Rated power(kw/r/min) 235/2200
Rated torque N.m/(r/min) 1250/1500-1600
Travel Performance
Max. travel speed(km/) 78
Min. turning diameter(m) 24
Min. ground clearance(m)  232
Approach angle(o) 18
Departure angle (o) 12
Gradeability(%) 35
Oil consumption(L/100km) 45
Max. rated lifting capacity(t) 55
Min. rated radius(m) 3
Max. lifting torque of boom(KN.m) 1786
Max. lifting torque of fully extended boom(KN.m) 956
Max. lifting torque of fully extended boom + jib(KN.m) 392
Outrigger span - longitudinal(m) 6
Outrigger span - transverse(m) 7.2
Boom length(m) 11.5
Fully extended boom length(m) 42.5
Length of fully extended boom + jib(m) 58.5
Hoisting height of boom(m) 12
Hoisting height of fully extended boom(m) 43
Hoisting height of fully extended boom + jib(m) 58.8
Jib angle 0o, 15o, 30o
Working speed
Elevation time of boom(raising/falling)(s) 80/60
Time of telescoping boom(extend/retract)(s) 120/100
Max. turning speed(r/min) 2.4
Max. single rope speed of main winch(m/min) 135
Max. single rope speed of aux. winch(m/min) 135
Time of horizontally extending/retracting outrigger(s) 45/40
Time of vertically extending/retracting outrigger(s) 45/30
]]> Mon, 29 Jun 2009 13:50:35 +0800 http://www.diging.com/Crane/797-SANY:Truck_Crane_QY50C.htm SANY:Truck Crane QY25C http://www.diging.com/Crane/796-SANY:Truck_Crane_QY25C.htm Main Features:
1. Novel industrial design:  European apical company designs series products of red star. This products feature novel appearance, hold holistic sense, and show international fashion. Besides advanced punching mould and electrophores is process improve elaborate manufacture.
2. Powerful lifting capacity: Boom embodies overseas or domestic low-alloy high-tensile structural steel and great-circle hexagnoal section, and has good neutral position and strong lifting capacity. Besides big span outrigger has good stabilization.
3. Efficient working performance: Single line pull is large, hoist speed is rapid, and single line speed is 125-135m/min due to double hoist variable motor design. Manipulation is precise, brake is stable, and work stabilization is advanced due to unique rotary cushion design.
4. One-up overlength main boom: Overtake main boom length and lead hoist height. Full extension length of QY25C main boom is 33.5m,and maximum hoist height is 33.9m.
5. Superexcellent traveling performance:  Powerful engine and reliable chassis systemmake Sany truck crane hold superexcel lenttraveling performance.
6. Precise control system: Limited moment control system is made up of Sany, which merges microelectronic technique intelligent malfunction dagnosis, and dynamical monitor technique. It made the equipment working more safty and efficiency.
7. Excellent ECC system: ECC control and manage system is the original technique of domestic engineering machine,  which determines the location with GPS, helps the customer master the vehicle location and  working condition, and realize the vehicle management and malfunction diagnose real time.
8. Strong service: Relay on strong service management of Sany group. extend country-wide 6S service point: take the concept of exceeding industry standard and customer expection, and provide oriental service.
""
Structure
Cab
It is made up of anti-corrosive steel plate, with streamline and full-width type, wide visul field, and elaborate structure. The interlayer safety glass is selected for the front windfield, with the full-sealed intenerated decorative element inside the cab. With heating and defrosting device and air conditioning system, it makes operators confortable, in addition, it has immproved the reliability and security of driving.
Power System
It characterized by oil saving, advanced design, and superior manufacture. It has made oil consumption 20% lower than that of domestic similar products.
Boom System
The main boom is made up by hexagonal section boom sleeve, additionally, as the finite element analysis is adopted, the reasonable design and commpacted structure has been guaranteed. The boom is of rational joint, and it is of the advanced bearing capacity in China.
Hydraulic System
The cartridge inserted valves(USA VICKERS) are selected as electromagnetic valves of the controlling oil circuit, as they are designed in combination of the leading control valve, it is characterized by flexible action as well as stable and reliable performance,and it has also provided protections to numerous combined working conditions.
Slewing&Hoisting System
The planet gear deceleration device and normally closed brake is taken for the slewing mechanism, in addition, the rotary cushion valve for special purpose is equipped to ensure a stable slewing.and, it is of good inching capability. The stepless shifting is achieved in the main and auxiliary hoisting mechanisms,and, it is of high efficiency, large shifting ratio, and reliable working performance.
Chasis&Electric System
Optimal chassis design leads to smooth power shifting.
Technical Parameters
Dimensions
Overall length 12605 mm
Overall width 2500 mm
Overall height 3450 mm
Wheelbase(front - middle) 4125 mm
Wheelbase (middle- rear) 1350 mm
Tread (front) 2079 mm
Tread (middle & rear) 1845 mm
Weights
Gross weight 29400 kg
Axle load - front 7000 kg
Axle load - middle & rear 22400 kg
Power
Engine model SC8DK260Q3(EuroIII)
Rated power 192 kw/rpm
Rated torque 1000 Nm/1400 r/min
Emission standard EuroIII
Travel Performance
Max. travel speed 83 km/h
Min. turning diameter 22 m
Ground clearance 30 %
Approach angle 16o
Departure angle 11o
Brake distance 9m
Min. gradeability 272mm
Oil consumption per 100 kilometers 36 L
Max. rated lifting capacity 25t
Outrigger span 5.1x6m
Max. lifting torque of boom 962kN.m
Max. lifting torque of fully extended boom 544kN.m
Boom length 10.65m
Fully extended boom length 33.5m
Length of fully extended boom + jib 41.5m
Max. hoisting height of boom 10.9m
Max. hoisting height of fully extended boom 33.9m
Max. hoisting height of fully extended boom + jib 42m
Working speed
Time of fully extending/retracting boom 95/56s
Elevation time of boom (raising/falling) 72/42s
Max. turning speed 2.5r/min
Time of horizontally extending/retracting outrigger 30/25s
Time of vertically extending/retracting outrigger 35/30s
Max. single rope lifting speed of main and auxiliary winch 130m/min
]]> Thu, 25 Jun 2009 10:05:36 +0800 http://www.diging.com/Crane/796-SANY:Truck_Crane_QY25C.htm SANY:Truck Crane QY20 http://www.diging.com/Crane/795-SANY:Truck_Crane_QY20.htm Structure
Cab
It is made up of anti-corrosive steel plate, with streamline and full-width type, wide visul field, and elaborate structure. The interlayer safety glass is selected for the front windfield, with the full-sealed intenerated decorative element inside the cab. With heating and defrosting device and air conditioning system, it makes operators confortable, in addition, it has immproved the reliability and security of driving.
Power System
It characterized by oil saving, advanced design, and superior manufacture. It has made oil consumption 20% lower than that of domestic similar products.
Boom System
The main boom is made up by hexagonal section boom sleeve, additionally, as the finite element analysis is adopted, the reasonable design and commpacted structure has been guaranteed. The boom is of rational joint, and it is of the advanced bearing capacity in China.
Hydraulic System
The cartridge inserted valves(USA VICKERS) are selected as electromagnetic valves of the controlling oil circuit, as they are designed in combination of the leading control valve, it is characterized by flexible action as well as stable and reliable performance,and it has also provided protections to numerous combined working conditions.
Slewing&Hoisting System
The planet gear deceleration device and normally closed brake is taken for the slewing mechanism, in addition, the rotary cushion valve for special purpose is equipped to ensure a stable slewing.and, it is of good inching capability. The stepless shifting is achieved in the main and auxiliary hoisting mechanisms,and, it is of high efficiency, large shifting ratio, and reliable working performance.
Chasis&Electric System
Optimal chassis design leads to smooth power shifting.
""
Technical Parameters
Dimensions
Overall length 12350 mm
Overall width <=2500 mm
Overall height 3280 mm
Wheelbase - front 4075 mm
Wheelbase - rear 1350 mm
Tread - front 2055 mm
Tread - rear 1838 mm
Weights
Gross weight in travel 24500 kg
Axle load - front 7000 kg
Axle load - rear 17500 kg
Power
Engine model Sc8dk230q3
Rated power 170/2300 Kw/(r/min)
Rated torque 800/1400~1600 N.m/(r/min)
Rated rotation 2300 r/min
Travel Performance
Max. travel speed <=72kg/h
Min. turning radius 11 m
Min. ground clearance 270 mm
Approach angle 19 o
Departure angle 12 o
Brake distance <=9 m
Max. gradeability 30%
Oil consumption per 100 kilometers 35L
Oil consumption per 100 kilometers 35L
Max. rated lifting capacity 20t
Max. rated lifting torque 20x3(tm)
Max. lifting torque 833kN.m
Boom length 10.5m
Fully extended boom length 32.55m
Jib length 8m
Length of fully extended boom + jib 40.55m
span (longitudinal/transverse) Outrigger5.15 m /6.0m/
span (longitudinal/transverse) Outrigger 5.15 m /6.0m/
Max. hoisting height of boom 11.2m
Max. hoisting height of fully extended boom 32.8m
Max. hoisting height of boom + jib 41.2m
Working speed parameters
Elevation time of boom (raising/falling) 70/40S
Time of extending/retracting boom 95/60S
horizontally extending/retracting outrigger Time of 30/25S
Time of vertically extending/retracting outrigger 35/30S
Main lifting speed (single rope) 130/85 m/min
Auxiliary lifting speed (single rope,) 110/85 m/min
Slewing speed 2.5 r/min
]]> Thu, 25 Jun 2009 09:58:44 +0800 http://www.diging.com/Crane/795-SANY:Truck_Crane_QY20.htm SANY:Hydraulic Crawler Crane SCC10000 http://www.diging.com/Crane/794-SANY:Hydraulic_Crawler_Crane_SCC10000.htm Structure
 
A.Engine
The Cummins Model QSK23 engine, 6-cylinder, water-cooled, rated at 597KW /2100rpm.
B.Slewing Mechanism
Slewing is driven by three motor reducers. Two slewing speed ranges: respectively 0-1.0r/min and 0-0.45r/min.
C.Hydraulic system
Hydraulic system includes: hoisting system, traveling system, slewing system, luffing system, servo system, back-stop system, cooling system, auxiliary system and etc.
D.Luffing Mechanism
Including main luffing device, aux. luffing device, and superlift luffing device;
E.Driver&apos;s Cab
Fully-enclosed steel frame structure is used. The front and flank sides are installed with toughened glass.
F.Control System
Imported RC controller, encoder, load moment limiter, display, intelligent sensor, and closed circuit monitoring system are employed.
 
""
Technical Parameters
 
H Operating Condition
Max. Lifting Load(mt) 727
Max. Lifting Moment(mtxm) 653x8
Boom Length(m) 30~90
Boom Luffing Angle(o) 30~85
HDB Operating Condition
Max. Lifting Load(mt) 1,000
Max. Lifting Moment(mtxm) 14,000
Boom Length(m) 42~120
Length of Super-lift Mast(m) 42
Boom Luffing Angle(o) 30~85
LJ Operating Condition
Max. Lifting Load(mt) 349
Boom Length(m) 42~60
Jib Length(m) 30~96
Full Extensional Boom+Full Extensional Jib(m) (48+96)(54+84)(60+48)
Boom Luffing Angle(o) 65~87(65, 75, 85, 87)
Jib Luffing Angle(o) 20~77
LJDB Operating Condition
Max. Lifting Load(mt) 463
Boom Length(m) 42~96
Jib Length(m) 30~96
Full Extensional Boom + Full Extensional Jib(m) 96+96
Length of Super-lift Mast(m) 42
Boom Luffing Angle(o) 65~87(65, 70, 75, 80, 85, 87)
Jib Luffing Angle(o) 20~77
SFH Operating Condition
Max. Lifting Load(mt) 618
Boom Length(m) 42~60
Jib Length(m) 18
Boom Luffing Angle(o) 30~85
SFL Operating Condition
Max. Lifting Load(mt) 463
Boom Length(m) 42~96
Jib Length(m) 18
Boom Luffing Angle(o) 30~85
Speed Data
Wire Speed of Main Hoisting Winch(m/min) 0~120
Wire Rope Speed of Aux. Hoisting Winch(m/min) 0~110
Wire Rope Speed of Main Luffing Winch(m/min) (0~60)x2
Wire Rope Speed of Aux. Luffing Winch(m/min) 0~120
Wire Rope Speed of Super-lift Luffing Winch(m/min) 0~110
Slewing Speed(rpm) 0~1.0/0~0.45
Traveling Speed(km/h) 0~1.1/ 0~0.4(Stepless Speed Adjustment)
Engine
Rated Output Power(kW) 597
Rated Rotational Speed(rpm) 2,100
Capacity of Fuel Tank(L) 1,200
Transport Data
Weight of Overall Crane(with Basic Boom)(mt) 760
Counterweight + Central Ballast + Super-lift Counterweight (mt) 250+80+450
Max. Transport Weight of Single Part(mt) 60
Transport Dimensions (Length x Width x Height)(mm) 13,930x3,400x3,130
Average Ground Bearing Pressure(with Basic Boom)(MPa) 0.165
 
]]> Tue, 23 Jun 2009 16:41:42 +0800 http://www.diging.com/Crane/794-SANY:Hydraulic_Crawler_Crane_SCC10000.htm SANY:Medium Scale Excavator: SY200C8E http://www.diging.com/excavator/793-SANY:Medium_Scale_Excavator:_SY200C8E.htm Main Features:
 
Meeting EPA,EU TIER II emission regulations,more powerful drive and lower fuel consumption;
Advanced positive floe hydraulic control system,easier operation and higher sufficiency;
New high performance Cummins engine,stronger power and lower noise;
Humanized design,perfect after-sale service system and lower maintenance cost;
CE Certification.
""
Technical Parameters
 
Overall dimension
Thansportlength 9397mm/30&apos;10&apos;
Thansporwidth 2800mm/9&apos;2.2&apos;
Thansporheight 2956mm/9&apos;8.4&apos;
Upperstructure width 2710mm/8&apos;10.7&apos;
Cab height 2930m/9&apos;7.5&apos;
Std.Track shoe width 600mm/1&apos;11.6&apos;
Track gauge 2200mm/7&apos;2.6&apos;
Min.groud clearance 440mm/1&apos;5.3&apos;
Tail swing radius 2750mm/9&apos;0.3&apos;
Length to centers of rollers 3260mm/10&apos;8.4&apos;
Thack length 4064mm/13&apos;4&apos;
Operation range
Max.digging height 9305mm/30&apos;6.3&apos;
Max.dumping height 6475mm/21&apos;3&apos;
Max.digging depth 6630mm/21&apos;9&apos;
Max.vertical wall digging depth 5980mm/19&apos;7.4&apos;
Max.digging reach 9885mm/32&apos;5.2&apos;
Min.swing radius 3630mm/11&apos;11&apos;
Max.height at min.swing radus 7570mmm/24&apos;10&apos;
Technical parameters
Operating weight 20300kg/44753 lb
Std.bucket capacity 0.83m^3/1.09yd^3
Rated power 112/1950kW/rpm/150.2/1950hp/rpm
Travel speed(low/high) 5.5/3.2km/h/3.42/2mph
Swing speed 12.5rpm
Gradesdbility 70%/35
Groud press(600mm track) 44.8kPa/6.497psi
Bucket digging ability 138kN/31045lb
Max.flow of main pump 2x210L/min/2x55.5gal/min
Relief valve pressure 34.3Mpa/4974psi
Travel hydraulic circuit 34.3Mpa/4974psi
Swing hydraulic circuit 25.5MPa/3698psi
]]> Tue, 23 Jun 2009 15:11:08 +0800 http://www.diging.com/excavator/793-SANY:Medium_Scale_Excavator:_SY200C8E.htm SANY:Medium Scale Excavator: SY200C8A http://www.diging.com/excavator/792-SANY:Medium_Scale_Excavator:_SY200C8A.htm Main Features:
Meeting EPA,EU TIER II emission regulations,more powerful drive and lower fuel consumption;
Advanced positive floe hydraulic control system,easier operation and higher sufficiency;
New high performance Cummins engine,stronger power and lower noise;
Humanized design,perfect after-sale service system and lower maintenance cost;
CE Certification.
 
""
Structure
 
A.Power System
with the CUMMINS engine originally imported,the powerful power system is of low fuel consumpiton,clear emission and low noise,so that it can provide power guarantee for high-efficiency operation of the excavator.
B.Hydraulic System
Applying the most advanced and mature positive flow hydraulic control system in the world ,the system is stable and of high operating performance and efficiency.The hydraulic elements are of world-famous brand.
C.Cab
It is very quiet in the cab when operating the machine;the alldirectionally adjustable seat of superior quality is very comfortable;the joystick and operation buttons are within your reach so that it is laborsaving and convenient;with the air reversed flow type air-conditioner,you can enjoy the most pleasant temperature.
D.Maintainability
The fittings originally imported and components of superior quality have longer maintenance cycle.The remote assembly of wearing patrs is realized so that the maintenance is more convenient,thus enhancing the utilization radio of machine and lowering the maintenance costs.
E.Structure
The slewing platform,undercarriage and fittings are of excellent mechanical property,and the cutting teeth are of favorable wearability,ensuring that the machine is solid and durable even under the most hard conditions.
Technical Parameters
Overall dimension
Thansportlength 9397mm/30&apos;10&apos;
Thansporwidth 2800mm/9&apos;2.2&apos;
Thansporheight 2956mm/9&apos;8.4&apos;
Upperstructure width 2710mm/8&apos;10.7&apos;
Cab height 2930m/9&apos;7.5&apos;
Std.Track shoe width 600mm/1&apos;11.6&apos;
Track gauge 2200mm/7&apos;2.6&apos;
Min.groud clearance 440mm/1&apos;5.3&apos;
Tail swing radius 2750mm/9&apos;0.3&apos;
Length to centers of rollers 3260mm/10&apos;8.4&apos;
Thack length 4064mm/13&apos;4&apos;
Operation range
Max.digging height 9305mm/30&apos;6.3&apos;
Max.dumping height 6475mm/21&apos;3&apos;
Max.digging depth 6630mm/21&apos;9&apos;
Max.vertical wall digging depth 5980mm/19&apos;7.4&apos;
Max.digging reach 9885mm/32&apos;5.2&apos;
Min.swing radius 3630mm/11&apos;11&apos;
Max.height at min.swing radus 7570mmm/24&apos;10&apos;
Technical parameters
Operating weight 20300kg/44753 lb
Std.bucket capacity 0.83m^3/1.09yd^3
Rated power 112/1950kW/rpm/150.2/1950hp/rpm
Travel speed(low/high) 5.5/3.2km/h/3.42/2mph
Swing speed 12.5rpm
Gradesdbility 70%/35
Groud press(600mm track) 44.8kPa/6.497psi
Bucket digging ability 138kN/31045lb
Max.flow of main pump 2X210L/min/2X55.5gal/min
Relief valve pressure 34.3Mpa/4974psi
Travel hydraulic circuit 34.3Mpa/4974psi
Swing hydraulic circuit 25.5MPa/3698psi
Pilot hydraulic circuit 3.9MPa/565.6psi
]]> Tue, 23 Jun 2009 15:03:19 +0800 http://www.diging.com/excavator/792-SANY:Medium_Scale_Excavator:_SY200C8A.htm SHANTUI:Wheel loader Sl50W SL50W 2 http://www.diging.com/excavator/791-SHANTUI:Wheel_loader_Sl50W_SL50W_2.htm Categories: Wheel loader Model: Sl50W-SL50W-2 name: Sl50W-SL50W-2 Wheel loader clicks: 1186 Engine: WD615/C6121ZG19 Weight: 17t""]]> Thu, 11 Jun 2009 14:41:53 +0800 http://www.diging.com/excavator/791-SHANTUI:Wheel_loader_Sl50W_SL50W_2.htm SHANTUI:Wheel loader SL30W http://www.diging.com/excavator/790-SHANTUI:Wheel_loader_SL30W.htm Categories: Wheel loader Model: SL30W name: SL30W Wheel loader clicks: 878 Engine: Wuxi Disel engine 6110 Weight: 10.8t""]]> Thu, 11 Jun 2009 14:36:00 +0800 http://www.diging.com/excavator/790-SHANTUI:Wheel_loader_SL30W.htm XGMA:Excavator XG823 http://www.diging.com/excavator/789-XGMA:Excavator_XG823.htm Superior Feature
 
1. Advanced ESS power model control system meets the requirement of all kinds of operation conditions.
2. Effective and reliable negative flow hydraulic system, man-machine-in-one operation feeling.
3. Genuine ISUZU engine, low fuel consumption, high reliability, powerful engine, high operation efficiency, cost-save short construction period.
4. Reinforced boom & arm ensure powerful digging, especially suit rough operation.
5.XG823: In conformity with EPA (FRL-4893-8) TIRE II emission control regulations
6. The 3-stage air filter reduces the weariness of cylinder & especially suit the heavy dust operation condition.
7. Easy operation, convenient maintenance and repairing.
8. Superior capacity of tool kit.
""
Main Equipment
1. Engine: genuine ISUZU CC-6BG1TRP
2. Hydraulic system (including main control valve, electric control pump, swing motor and reducer, pilot control valve):genuine KAWASAKI
3. Travelling motor and reducer:genuine NABTESCO
4. Cylinders:genuine KYB
5. Indicator board:genuine KAWASAKI
6. Hydraulic pipe & connecting piece-American famous brand products.

 
Working Range  
Type
XG823

Max. cutting height
9680mm

Max. dumping height
6786mm

Max. digging depth
6940mm

Max. vertical wall digging depth
6100mm

Max. digging reach		 10290mm

Max. digging reach on ground 		10110mm

Min. swing radius		 3935mm
8'Max. digging depth (8'level) 6740mm

Overall dimension  
Type
XG822LC

Overall width of superstructure
2890mm

Overall height of cab
3020mm

Tail swing radius
2930mm

Overall width
2990mm

Overall length
10140mm

Overall height of boom
3100mm

Track gauge		 2390mm

Shoe width		 600mm

Undercarriage width		 2990mm

Tumble length 		3460mm

Track length 		4260mm

Min. ground clearance 		460mm

Specification   
Specification
Operation Weight 23500kg
Power 125kw/2100rpm
Capacity of Bucket 1.05m 3
Maximum Digging Force 150KN
Travel Speed 5.5/3.2 km/h
Grade ability 35o
Pressure to the Ground 50kpa
Swing Speed of Plarform 11.5rpm
]]> Tue, 09 Jun 2009 09:49:48 +0800 http://www.diging.com/excavator/789-XGMA:Excavator_XG823.htm XGMA:Excavator XG822LC http://www.diging.com/excavator/788-XGMA:Excavator_XG822LC.htm Superior Feature :
 
1. Advanced ESS power model control system meets the requirement of all kinds of operation conditions.
2. Effective and reliable negative flow hydraulic system, man-machine-in-one operation feeling.
3. Genuine ISUZU engine, low fuel consumption, high reliability, powerful engine, high operation efficiency, cost-save short construction period.
4. Reinforced boom & arm ensure powerful digging, especially suit rough operation.
5. Longer & wider frame/track, stronger structure, more stability operation
6.Heavier counterweight, more stability operation
7. Easy operation, convenient maintenance and repairing.
8. Superior capacity of tool kit.
Main Equipment :
1. Engine: XG822LC:genuine ISUZU 6BG1TQB
2. Hydraulic system (including main control valve, electric control pump, swing motor and reducer, pilot control valve:genuine KAWASAKI
3. Travelling motor and reducer:XG822LC:genuine KYB
4. Cylinders:genuine KYB
5. Indicator board:genuine KAWASAKI
6. Hydraulic pipe & connecting piece-American famous brand products.
7. XG822LC :Adopting famous brand of the four wheels and the crawler to ensure the long life of the travelling device.
""
 
Type
XG822LC

Max. cutting height
9600mm

Max. dumping height
6780mm

Max. digging depth
6670mm

Max. vertical wall digging depth
6050mm

Max. digging reach		 9910mm

Max. digging reach on ground 		9750mm

Min. swing radius		 3540mm
8'Max. digging depth (8'level) 6490mm

Overall dimension  
Type
XG822LC

Overall width of superstructure
2680mm

Overall height of cab
2920mm

Tail swing radius
2750mm

Overall width
2990mm

Overall length
9500mm

Overall height of boom
2910mm

Track gauge		 2390mm

Shoe width		 600mm

Undercarriage width		 2990mm

Tumble length 		3660mm

Track length 		4460mm

Min. ground clearance 		450mm


Specification   
Specification
Operation Weight 20700kg
Power 117kw/2150rpm
Capacity of Bucket 0.95m3
Maximum Digging Force 118KN
Travel Speed 5.2/3.3 km/h
Grade ability 35o
Pressure to the Ground 43kpa
Swing Speed of Plarform 12.5rpm
]]> Sun, 31 May 2009 10:06:28 +0800 http://www.diging.com/excavator/788-XGMA:Excavator_XG822LC.htm XGMA:Excavator XG820 http://www.diging.com/excavator/787-XGMA:Excavator_XG820.htm Superior Features
 
1. Advanced ESS power model control system meets the requirement of all kinds of operation conditions.
2. Effective and reliable negative flow hydraulic system, man-machine-in-one operation feeling.
3. Genuine ISUZU engine, low fuel consumption, high reliability, powerful engine, high operation efficiency, cost-save short construction period.
4. Reinforced structural parts ensure durable.
5. Easy operation, convenient maintenance and repairing.
6. Superior capacity of tool kit.
""
Working Range
  

Max. cutting height
9600mm

Max. dumping height
6780mm

Max. digging depth
6670mm

Max. vertical wall digging depth
6050mm

Max. digging reach
9910mm

Max. digging reach at on ground		 9750mm

Min. swing radius		 3540mm
8'Max. digging depth (8'level) 6490mm

Overall dimension  

Overall width of superstructure
2680mm

Overall height of cab
2920mm

Tail swing radius
2750mm

Overall width
2800mm

Overall length
9500mm

Overall height of boom
2910mm

Track gauge		 2200mm

Shoe width		 600mm

Undercarriage width		 2800mm

Tumble length		 3370mm

Track length 		4170mm

Min. ground clearance 		450mm

Operating weight (kg)
19500
Rated power (KW/ rpm)
110/2150
Bucket capacity (Standard capacity) (m3)
0.6~1.0(0.8)
Swing speed (r/min)
12.5
Travelling speed (H/L) (km/h)
5.1/3.3
Ground pressure (kPa)
43.8
Gradeability (o)
35o(70%)
Digging force (KN)
118
]]> Sun, 31 May 2009 09:58:07 +0800 http://www.diging.com/excavator/787-XGMA:Excavator_XG820.htm XGMA:Excavator XG805LII http://www.diging.com/excavator/786-XGMA:Excavator_XG805LII.htm
RANGE OF OPERATION
Maximum Digging Depth
3145mm
Maximum Digging Height
5515mm
Maximum Dumping Height
3900mm
Maximum Digging Radius
5750mm
Minimum Swing Radius
6200mm

DIMENSIONS
Overall Length in Transport Condition
3335mm
Maximum Width
2035mm
Overall Height in Transport Condition
2710mm
Minimum Base to the Ground
220mm
 
 
 
 
 
 
 
""
 
TECHNICAL PERFORMANCE AND SPECIFICATION
Operation Weight
4600kg
Capacity of Bucket
0.25 m3
engine model
498BPG
Power
40Kw/2400rpm
Maximum Digging Force
27KN
Maximum Travel Speed
35 Km/h
Grade ability
34%
Swing Speed of Platform
10 rpm
]]> Sun, 31 May 2009 09:50:47 +0800 http://www.diging.com/excavator/786-XGMA:Excavator_XG805LII.htm XGMA:Excavator XG804 http://www.diging.com/excavator/785-XGMA:Excavator_XG804.htm Capability:
  • Powerfur engine
  • Economic and  efficiency 
  • Safety and reliability 
    •  
    Operating Range:
    Operating Range
    Maximum Digging Height 5080mm
    Maximum Dumping Height 3520mm
    Maximum Digging Depth 3765mm
    Maximum Digging Dadium 5700mm
    Rear Swing Radius 1590mm
    Maximum Depth for Buildozing 350mm
     
    ""
    Exterior Dimensions:
    Exterior Dimensions
    Maximum Width 1650mm
    Overtall Height in Transport Condition 2450mm
    Width of Platform 1500mm
    Track Gauge 1328mm
    Crawler Overall Length 2150mm
    Creeper Tread Width 300mm
    Minimum Base to the Ground 350mm
    Overall Length in Transport Condition 5480mm
    Bulldozing Width and Height 1650mm x 300m
     
    Specification:
    Specification
    Operation Weight 4000kg
    Power 26Kw/2200rpm
    Capacity of Bucket 0.13cm3
    Maximum Digging Force 23KN
    Maximum Hauling Capacity 33.5KN
    Hydraulic System Working Oressure 21Mpa
    Changeable Flowrate Pump 20*2(cm3/rev)
    Constant Flowrate Pump 16+4.5cm3/rev)
    Travel Speed 2/4Km/h
    Grade ability 58%(30o)
    Pressure to the Ground 35Kpa
    Swing Speed of Plarform 11.2rpm
     
    ]]>     Tue, 26 May 2009 14:48:30 +0800 http://www.diging.com/excavator/785-XGMA:Excavator_XG804.htm     XGMA:XG962 Loader http://www.diging.com/excavator/784-XGMA:XG962_Loader.htm Superior Performances:
    • Unique energy-saving patent technology, including double pumps and double circuits, turning priority and unloading hydraulic pressure system, is efficient and energy-saving with better power performance and lower fuel consumption;
    • Completely new shape and appearance, spacious driver's cab enables a broad view and is equipped with comfortable adjustable seat;
    • The Z-form connecting rod on single rocker arm together with solid bucket ensure strong breakout force;
    • Well-arranged hydraulic hose is both pleasing to the eye and durable;
    • Coaxial Flow Amplifying Steering system provides flexible steering operation; advanced control system, hydraulic steering facilitates easy operation;
    • Electronic device of automatic bucket leveling and limited lifting position saves you both time and trouble;
    • Convenient rear cover and concentrated lubricating system facilitate maintenance and repairing;
    • Fork-type frame provides good machine stability and stronger structural strength;
    • Superior machine performance and extraordinary operating efficiency;
    • Various optional equipments and buckets can satisfy different needs of customers;
    • Imported Parker hydraulic hose;
    • GRAMMER luxurious driving seat;
    ""
    Specification:
    Enginer
    Rated power 175kw
    Overall dimensions
    Overall length 8560mm
    Overall width 3128mm
    Overall height 3490mm
    Dumping height 3340mm
    Dumping reach 1380mm
    Specification of type
    23.5-25-20PR
    Performance parameters of entire machine
    Operating weight 18500kg
    Bucket capacity 3.5m3
    Rated loading capacity 6000kg
    Turning radius 6320mm
    Gear box ZF4WG200
    Number of shifts (forward/reverse) 4/3
    Fuel tank capacity 300L
    Hydraulic fuel tank capacity 250L
    Lifting time <=6.5S
    Total cycling time <=10.5S
    Travel speed
      Forward gear I 6.65km/h
      Forward gear II 11.8km/h
      Forward gear III 23.5km/h
      Forward gear IV 37.6km/h
      Reverse gear I 6.65km/h
      Reverse gear II 11.8km/h
      Reverse gear III 23.5km/h
    ]]>     Tue, 26 May 2009 14:40:35 +0800 http://www.diging.com/excavator/784-XGMA:XG962_Loader.htm     XGMA:XG958 Loader http://www.diging.com/excavator/783-XGMA:XG958_Loader.htm Superior Performances:
    • Unique energy-saving patent technology, including double pumps and double circuits, turning priority and unloading hydraulic pressure system, is efficient and energy-saving with better power performance and lower fuel consumption;
    • Coaxial Flow Amplifying Steering system provides flexible steering operation, advanced control system,hydraulic steering facilitates easy operation;
    • The product has passed the international CE certification;
    • Low fuel-consuming, high-quality Turbo Charge Engine has good power performance and big torque reserve;
    • The advanced technology in Germany ZF gear box makes it more reliable and efficient;
    • Single lever controlling transmission system with K-D function allows easy and simple operation;
    • Strong towing force and breakout force, short working device cycling time, Superior machine performance and extraordinary operating efficiency;
    • Optional ZF driving axle equipped with single-line wet multi-disc braking system with extra emergency braking system ensures a safer drive;
    • Solid bucket performs strong breakout force;
    • Spacious driver&apos;s cab has a broad view and comfortable adjustable seat;
    • Well-arranged Parker hydraulic hose is both pleasing to the eye and durable;
    • Electronic device of automatic bucket leveling and limited lifting position saves you both time and trouble;
    • Super large overhauling side door facilitates maintenance and repairing;
    • Middle hinge joint and box-type frame provide good machine stability and stronger structural strength;
    • Various optional equipments and buckets can satisfy different needs of customers;
    ""
     
    Enginer
    Rated power 160kw
    Overall dimensions
    Overall length 8110mm
    Overall width 3010mm(bucket)
    Overall height 3420mm
    Dumping height 3000mm
    Dumping reach 1300mm
    Specification of type
    23.5-25-16PR
    Performance parameters of entire machine
    Operating weight 16800kg
    Bucket capacity 3.0m3
    Rated loading capacity 5000kg
    Turning angle (+-)35o
    Turning radius 6950mm
    Gear box ZF4WG200
    Number of shifts (forward/reverse) 4/3
    Fuel tank capacity 300L
    Hydraulic fuel tank capacity 250L
    Lifting time <=6.5 S
    Total cycling time <=10.5 S
    Travel speed
      Forward gear I 6.96km/h
      Forward gear II 12.4km/h
      Forward gear III 25.5km/h
      Forward gear IV 38.5km/h
      Reverse gear I 6.96km/h
      Reverse gear II 12.4km/h
      Reverse gear III 25.5km/h
    ]]>     Tue, 26 May 2009 14:36:04 +0800 http://www.diging.com/excavator/783-XGMA:XG958_Loader.htm     XGMA:XG955II Loader http://www.diging.com/excavator/782-XGMA:XG955II_Loader.htm Superior Performances:
    • Unique energy-saving patent technology, including double pumps and double circuits, turning priority and unloading hydraulic pressure system, is efficient and energy-saving with better power performance and lower fuel consumption;
    • Single rocker arm and longer wheelbase;
    • Leading brand of engine with CAT technology, higher torque reserve;
    • Comfortable advanced control system, hydraulic steering with adjustable steering wheel;
    • Coaxial Flow Amplifying Steering system provides flexible steering operation; the advanced hydraulic control system also facilitates easy operation;
    • Electronic device of automatic bucket leveling and limited lifting position;
    • Concentrated grease filling port facilitate maintenance and repairing;
    • 4-Plate type body frame structure has stronger structural strength, the entire machine shows good stability;
    • Superior machine performance and extraordinary operating efficiency;
    • Various optional equipments and buckets can satisfy different needs of customers;
    • Suitable for working conditions of digging;
    ""
     
    Specification:
    Enginer
    Rated power 160kw
    Overall dimensions
    Overall length 7815mm
    Overall width 2990mm
    Overall height 3350mm
    Dumping height 3058mm
    Dumping reach 1263mm
    Specification of type
    23.5-25-16PR
    Performance parameters of entire machine
    Operating weight 17000kg
    Bucket capacity 3m3
    Rated loading capacity 5000kg
    Turning angle (+-)35o
    Turning radius 6550mm
    Gear box XG
    Number of shifts (forward/reverse) 2/1
    Fuel tank capacity 230L
    Hydraulic fuel tank capacity 280L
    Lifting time <=6.5S
    Total cycling time <=12.3S
    Travel speed
      Forward gear I 11.5km/h
      Forward gear II 38km/h
      Reverse gear I 16km/h
    ]]>     Tue, 26 May 2009 14:27:51 +0800 http://www.diging.com/excavator/782-XGMA:XG955II_Loader.htm